CelestialSeeker Posted February 3 Share Posted February 3 P0101FA on a Mercedes-Benz W213 is giving me a hard time. The mass airflow meter and air filter have been changed, and the hfm values have been adjusted using Icarsoft v2.0. After reaching 2.5–3,000 rpm, the car continues to operate in what seems like a limp mode with limited power. Just like that, CEL disappeared for around three weeks, and the vehicle went into limp mode. I returned just now. The re-adaptation of the MAF (Hfm drift values xxxxx) caught my attention. At this time, all of the corrected values are zero. Is this the way it ought to be? In the absence of a limp or CEL, I recall that they were all about 10 years old. With a functional maf, shouldn't the correction values be set to 0%? Has anyone else encountered this problem? Quote Link to comment Share on other sites More sharing options...
ENVIOclev Posted February 3 Share Posted February 3 the most typical offender; increase leak? (I have no idea what P0214fA14627 signifies...) Quote Link to comment Share on other sites More sharing options...
CelestialSeeker Posted February 3 Author Share Posted February 3 There is a problem with Air Mass Meter 1, P0101FA. Quote Link to comment Share on other sites More sharing options...
CelestialSeeker Posted February 3 Author Share Posted February 3 https://www.ebay.co.uk/sch/i.html?_nkw=air mass meter&campid=5338181132&customid=2518X1570512X2a6111db9945a93a3342184351d97aeb&mkcid=1&mkrid=710-53481-19255-0&subId2=15&toolid=10001 Quote Link to comment Share on other sites More sharing options...
ENVIOclev Posted February 3 Share Posted February 3 Make sure to inspect the MAF wires as well as any potential boost leaks; a hose split can potentially be difficult to spot. Quote Link to comment Share on other sites More sharing options...
CelestialSeeker Posted February 3 Author Share Posted February 3 Is anyone here? Quote Link to comment Share on other sites More sharing options...
vitessear3 Posted February 3 Share Posted February 3 In the fourth post, you were advised something. Quote Link to comment Share on other sites More sharing options...
CelestialSeeker Posted February 3 Author Share Posted February 3 Can you tell me the recommended voltage for the MAF pins? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.