All Activity

The glove box and armrest are empty. Indeed, it meets all requirements.

Wow, the blue one from Pompey was really good! Can you think of a USB port on the armrest that might work? My best guess is that you've already searched the most obvious spot—the glove box. With the 'Media Interface' on my 2012 E350, I could play music from my iPod classic via Comand. You may find it in my E400 as well.

I recently acquired a 2010 A207 (technically an E class convertible, but it's actually a C class...) equipped with an Audio 20 that has an integrated CD changer. Additionally, it has the Universal Communications Interface (Option 518), as stated on the LastVin datacard. Does it only work with Bluetooth, or can I also use it to play music from an SD card or USB stick? If the latter, where can I find the appropriate connector? It's not here; I've searched everywhere.

Make sure there is no damage if the lug nuts are loose enough to make a noise. To ensure that the wheel holes have not been chewed up or ovalled, remove each wheel that is affected and inspect all of the studs.

Oh great, it seems like the dealer forgot to torque the rear wheel lug nuts to specification when they were changing the oil and rotating the tires on my car. How frustrating!

Just the other week, I had a little twig (or branch, slightly bigger) stuck in my back wheel. Sounds pretty much the same to me. I managed to extract it by squeezing my palm narrowly between the spokes. While you're driving, a little branch inside your wheel or spoke could break off, leaving the remainder stuck behind. If I hadn't been on the lookout for it, I probably wouldn't have noticed it right away. I would look under your vehicle from the side opposite the source of the noise or, if you think it's related to speed, inside the wheels to see if there's anything there. It could be anything else, but that's a good place to start. Also, make sure the tyre isn't being scraped by any loose trim pieces (or ones that don't have a push-pin).

Adapts its speed to that of the car? Everything from the wheels and axles to the brakes, differential, driveshaft and gearbox is part of the drivetrain. I would highly recommend towing. In the event that an issue arises, the dealer will not be able to blame you for driving recklessly or making matters worse. (I wouldn't take the chance that they may, but it doesn't mean they definitely would.) It may be something as insignificant as an object caught in a moving component. A steel cable got stuck on my wife's driveshaft years ago when she was passing over something. Out of nowhere, "thump thump, thump"—exactly as you said. I don't know what the odds of that happening again are, but here's hoping it's something nearly that easy for you.

Apologies if this has been covered but I didn't see my exact scenario. Suddenly, a big thud shook me. It sounds like it is coming from the rear/center of the vehicle but cannot be sure. Like a train starting up, it goes faster and slower as the vehicle does. My first instinct was that one of my tires had gone flat, but upon closer inspection, I saw no damage, leaks or loose components beneath the wheels, and the tire pressure was within normal range. Even if I'm only a short drive from the dealership, wouldn't it be best to have it hauled in this case? Does that suit any of the known, prevalent drive train problems?

https://madpaints.co.uk/

The intended appearance and where to buy the paint are shown below. But if that doesn't work, there are many of excellent sites like www.madpaints.co.uk that just require your registration.

You can find your build sticker in the spare tyre well.

Except in the case of a one-of-a-kind custom project, you'd think a real Audi dealer would know.

https://smartcarcheck.uk/car-specs

I found mine under the carpet in the trunk, so be sure to look in the spare tire well as well. A website named https://smartcarcheck.uk/car-check was actually something I found by accident. If you try your reg, it can bring up your specification details when I was exploring forums for my own code. Otherwise, entering your VIN into the parts system of a major dealer should yield the most accurate results. Which year and model is it?

The paint code, rather than the name, is the better choice. To find out which license plate bears the code, consult the manual.

Although it may not seem important, I am finding it more difficult than I anticipated to determine the precise name of the paint colour of my vehicle. The body shop wanted to know the exact name of the color—not just blue or gray—so they could touch up a few scratches. The colour appears to shift in response to changes in lighting, adding to the already perplexing situation. No paperwork pertaining to the car's paint job was included when I purchased it used. There doesn't seem to be anything that would explain it when I look under the hood and around the door frames. The last thing I need is to order the wrong paint and ruin the look. Please share your experience if you have ever had to locate the paint code for a used car.

😁

MyCarsoft is capable of handling that.

The air intake and intercooler pipes should be inspected for any signs of leaks. If the MAF isn't the problem, any pipe following it could be. That will prevent it from regenerating and will be the cause of the buildup. In an ideal world, following the manual clean, you would have diagnostic tools that could reset the soot accumulation.

When you're heated, you might undo and use a lot of Plusgas. It is my preference to remove the temperature sensor and utilise that port.

Thanks for getting back to me. I'm going to use my handyman skills to fix it myself. I plan to inject foaming dpf cleaner into the thicker pipe that is attached to the dpf diff pressure sensor above the turbo assembly. I watched some videos from O Riley Autos and he does a lot of dpf cleans on the go and usually doesn't need to force regen because the cleaner does the job. I'll keep you posted once I finish. Cheers!

Would you like to hire a mobile DPF guy to come to your house or place of business, or do you intend to perform it yourself? Even though I don't know how much they cost, I have seen several of them on YouTube. I am genuinely interested in knowing how often DIY projects succeed compared to those that are handled by professionals.

It appears to require a regen due to the impending DPF issue. Does the regen have any restrictions? There may be an issue with the MAF, but it could be caused by something else. I'm not an expert, but maybe if you probed more, you could find out. I figured Foxwell would be a good diagnostic tool, but I haven't really utilised it.