All Activity
- Past hour
-
It is acceptable. Reviewed several videos prior to commencing the task, but found them unhelpful for reassembly. I have discovered another instance, and as illustrated in this screenshot, the angle between the knuckle and the shock is markedly different, hence increasing my confidence in aligning them. Currently, it is dark, and there have been two days of rain; therefore, I will attempt again in three days.
-
Greetings, I appreciate your response. The problem lies not in elevating the hub/knuckle to engage with the shock, but in compressing the shock/spring while installed on the vehicle to align the top mounting hole of the knuckle beneath it. I am experiencing significant difficulties compressing the shock, and even when I succeed, I cannot bring the top of the knuckle close enough to the car to engage the shock. I removed the shock absorber, but the angle of the knuckle, as observed from above where the shock connects, suggests that there may be an issue.
-
Assistance required for replacing the front suspension spring.
mrnobady replied to Needsnewtyres2's topic in General Car Chat
I am uncertain about what is misaligned for you, but when replacing shocks and springs, I frequently utilise a jack beneath the hub to elevate it and facilitate movement until proper alignment is achieved. Best of luck. -
I attempted to do mine today and encountered a minor tragedy. It took 1.5 hours to replace the spring, but midway through, the socket adapter in my impact driver broke off flush within the holder, rendering it impossible to remove. Progress was satisfactory till that point. I am currently unable to reinsert the completed shock absorber into the hub and must postpone the task until tomorrow due to diminishing daylight. I have removed the shock absorber from the vehicle, and it appears that the upper part of the hub does not align with the aperture in the wing designated for the shock's upper attachment. I suspected the drive shaft may have disengaged from the gearbox; however, there is no visible oil, and I am unable to rotate the brake disc, indicating it remains properly situated. I assume the hub's apex should connect with the shock's mounting hole in the wing for proper alignment, or does the insertion of the shock adjust the hub into alignment? I am hesitant to apply force, as it may misalign and result in damage or deformation to the vehicle. Does anyone have any suggestions?
- Yesterday
-
The 2008 318d was functioning optimally until I inadvertently allowed a handbag to become lodged behind the gear stick while the vehicle was in motion. Consequently, the car revved excessively out of gear, as it failed to shift due to the obstruction. The engine subsequently stalled, but it restarted slowly, only to falter again on the first incline, losing power and displaying an alternator warning. Electrical systems, including the doors and brakes, ceased to function despite having driven for an hour without issues. The garage will only assess the vehicle after Christmas; it is operational again, but the mechanic reports a significant knocking sound and smoke upon cold starts. Given the age of the car, he suggests that repairs may not be worthwhile, as it could indicate a severe engine issue. The vehicle was operating exceptionally well and covering considerable distance without any problems until I made the imprudent decision to search for chewing gum with one hand while navigating slowly through traffic while entering a town, inadvertently causing the bag to drop under the gear stick.
- Last week
-
2014 Mini Countryman Automatic SD
EnchantedScribe replied to stevenkeyte's topic in General Car Chat
thanks -
The Qashqai arrived last night around 6:30pm. Driver rang about half an hour before arrival, turned up right on time, handed over all the documents, and the car looks exactly like the photos. It’s booked in with my local garage tomorrow just to double-check everything, big thanks to everyone who shared their experiences it genuinely helped me make the decision.
-
I experienced the same feelings. I purchased a 2021 Peugeot 5008 GT Line from Whelan Transport and I felt a bit anxious initially but they were quite transparent about the entire process. I had mine checked, after three days gave them the green light, and that was that. Honestly, the process was much smoother than I expected
-
I purchased a 2021 Seat Ateca for my wife through Whelan Transport, and it was delivered to my home in Sheffield in just over a week. They allowed me plenty of time to examine it thoroughly before completing the sale without any pressure or chasing. We had it inspected by a mechanic and was pleased so we proceeded to inform them that we were accepting the car.
-
I utilise a 2-foot long spike to incapacitate them. Regarding cleaning, one may consider pumping a substance into the rear section of the exhaust. If your vehicle is equipped with two oxygen sensors, it will possess a catalytic converter; if it has only one sensor, it will not.
