All Activity

The person who posted the question clearly does not appear to have much expertise car-spanking, but I love it when they complete a major task like this. So, nicely done!

Quite a bargain! There is no way to "over research" anything like this, in my opinion. 🤎 Perhaps I stand out to many, but before beginning any activity, no matter how simple, I conduct extensive research. Those who aren't aware of the gaskets will also benefit from knowing about them. Having a significant savings is the cherry on top, once again.

I may have done a little too much research on this one, but it was well worth it! No one ever says this, but you have to change the gaskets every time you remove the throttle valve and the pipes that go with it. It is important to keep this in mind before beginning. Warning: I spent approximately 8.5 hours on the project (not counting the time spent on the water pump). Even while it's not great for a first-timer, it's better than paying the €2.2k that Mercedes asked for the identical job! 😅

Even though you were already investigating, the name SPR Autos popped into my head as I read your message. You did an excellent job! A significant reduction in expenses makes it even better.

Great work and congratulations!

I Achieved It, Yeah! This is the Worst Job Ever! At last got around to doing it, and holy cow, was I a swine! There are two points that are consistently overlooked: The housing for the fuel filter: the new authentic Mercedes component differs from the initial. For a long, I didn't know what to do with a few more mounting points here and a few missing ones there. Despite my best efforts, I was informed by the local dealer that it is now a "one-part-fits-all" setup. 🤦‍♂️

Money vs. time I'm reasonably handy and have everything I need, but I'm struggling to decide: Approximately how long will it take from beginning to end? Compared to simply paying a nearby garage (around €72/hr here)” I'm interested in hearing about actual completion times, tips, any problems encountered by anyone who has installed the oil cooler housing and/or water pump on the OM651. Thank you ahead of time!

«The Greatest Mystery» Since draining the oil and coolant from an oil cooler is a two-part process, I see no reason not to do the water pump and cooler simultaneously. My current line of inquiry is centred around — Is it feasible to accomplish this task on my own at home? In your experience, how long did it take? There are a lot of moving parts, but it seems like it's mostly just a matter of unbolting and rebolting.

Wanted Components Refurbished oil cooler set (with housing and gaskets) Renovated water pump Delivered for a total of €475—all authentic Mercedes parts from Germany. The irony is that the identical components were estimated to cost €880 in France! 🇩🇪💶

Now I'll give you an update (and ask anyone who has dealt with this before). With 15,000 kilometres on the clock since purchase, I should probably get another oil change soon anyhow. The coolant leak, which has been going on for the past month, is emanating from the area around the water pump. It appears to be very easy to order a new pump, so I have already done that. On the other hand, I've discovered a huge oil leak. The engine's undercarriage is a disaster, yet I'm not losing much oil. It appears that the oil cooler/filter housing is leaking, according to some camera-based investigation. My research suggests that this is a classic OM651 issue.

I feel the same way. The washer fluid is propelled over the top of the automobile by the air that enters through the hood, which then strikes the windscreen. Since this may pose a threat to users' safety, I believe it requires redesign and subsequent updates.

Though I would have preferred a more uniformly saturating mist (for the front and back, particularly that stream for the back glass), it's actually quite passable. In addition to double-checking spirod's suggestion, I would just extend the duration of the wiper spray anytime you are travelling at a greater pace. On a purely anecdotal basis, I think it makes a noticeable difference to lightly tap the brakes while travelling at highway speeds and to spray washer fluid to ensure better saturation. (At least for many of these newer vehicles that want to conceal the wipers beneath the hood to the extent that you have to switch them to service mode to bring them up) The washer fluid spray installed on the wiper bars themselves is a brilliant design. The washer fluid spray on the new Palisade is permanently mounted below the windscreen, so it barely reaches the top portion of the window either parked or driving.

At 75 miles per hour, mine operate just fine. Make sure the wiper arm is in the right place before continuing. The process of removing ice from the windscreen has unintentionally removed them.

No problems at all with my washer fluid... while ATTENTED to a traffic signal. YET, while going over fifty miles per hour, it completely omits the region that the motorist can see in front of their nose! Fluids can't clean that area because of the wind. Terrible layout; give it a go the next time you're driving. Look at that dry spot and tell me I'm incorrect...

My 2002 model is still going strong and is set to hit 200,000 miles. If you want to get lunar miles out of your BMW cbs, check the service record for any additional oil or filter changes; that's how you do it.

In my opinion, you won't know until you take it for a spin. While these vehicles can certainly continue for a great distance, 208k miles is likely over the limit.

How many issues it brings up is a key factor.

Not selling, but buying

Best wishes.

Is this worth a go as a low-cost winter hack? the registration number is KJ55 UNR Jul 2026 - MOT FSH has Diesel engine upgrade to 218 horsepower

Similar to DB's post up there, I checked mine out this morning and found that it is nothing more than an open cutout:wallbash: nothing fitted.